WINCODE LP423N, User Manual

Page: 10 / 68

LP4 USER MANUAL
- 9 -
2. Setup
2.1 Setting up the printer
1.) Place the printer on the flat surface.
2.) Make sure the power switch is OFF.
3.) Choose corresponding cable (RS232 or USB 2.0) to connect printer with computer.
4.) Plug the DC power cord into the power slot and plug the AC power cord into a
socket on the wall.
Note: Power Cord instruction
⚫
To use 100-125 Voltage, please choose minimum rating power cord. (125V, 10A)
⚫
To use 200-240 Voltage, please choose minimum rating power cord. (250V, 10-
16A)
⚫
Please select the power cord length less than 2 meter.
⚫
Power cord is connected with adapter and have to plug in the jack
as ICE-320-C13 as right figure.
Country/ Area North
America/Taiwan
Europe China
Power cord
Voltage and
Electricity Spec.
125V, 10A
SVT 18AWG
250V,10A
H05VV-F
250V,10A
RVV H05VV-F
Plug (Refers to the
local plug standard)
125V, 10A 250V, 16A 250V, 10A