DO NOT ATTEMPT TO ADJUST CYLINDER!
The Gas Cylinder is preset during manufacturing and should
NOT
be adjusted without contacting Winco
Customer Service.
•
Adjusting the cylinder will not make the mechanism operate easier or more smoothly.
•
If cylinder is removed and allowed to extend it will
NOT
be able to be reinstalled without special
tools.
Page 26 of 32
Document No.: 006344
Revision: I
OWNERS OPERATING & MAINTENANCE MANUAL
VER
Ō C
ARE CLINER
GENERAL MAINTENANCE
GAS CYLINDER OPERATION
GENERAL CARE & CLEANING
•
Periodically inspect tightness of all screws, bolts, nuts, or other fasteners.
•
REGULARLY lubricate pivot points on the recline mechanism with a lubricant approved by your
facility.
•
(If equipped) Periodically position the chair back into full recline position to keep the gas cylinder
lubricated.
Winco Mfg., LLC’s full-line of products are built to provide durability and reliability when properly cared
for. In general all of our products should be:
1. Cleaned
2. Disinfected (per facility policy)
3. Rinsed
4. Allowed to air dry
It is important to note that disinfecting a product is not the same as cleaning the product. Disinfectants
alone will not provide adequate cleaning, they do not have grease or oil cutting properties to remove
grime or hair and skin oils. Over time, the appearance, feel and performance of your upholstery may
diminish if not cleaned properly.
Summary of Contents for Vero Care Cliner
Page 2: ......