Winco Vero Care Cliner, Owner'S Operating And Maintenance Manual, Page: 17 / 32

Attendant should be positioned on the RIGHT or LEFT side of chair.
1. To return chair to the recline position, push down on seat
(recommended) or lift up on chair back.
Attendant should be positioned on the RIGHT or LEFT side of chair.
1. While occupant is in the chair, place the chair into the
fully reclined position. (
SEE "Recline Chair From Attendant
Position").
2. Once chair is fully reclined, attendant can push down on the
rear of Trendelenburg lever (A) with their foot, allowing it to
move down.
3. Hold Trendelenburg lever in position & push down on
the chair's back (B). This will shift the occupant into the
Trendelenburg position.
Release Trendelenburg lever.
Chair must be in the fully reclined position
BEFORE occupant can be placed into
Trendelenburg.
NOTE :
Pushing down on the seat (B) is recommended for
maximum leverage.
NOTE :
The chair does NOT lock in the Trendelenburg position.
Page 17 of 32
Document No.: 006344
Revision: I
OWNERS OPERATING & MAINTENANCE MANUAL
VERŌ CARE CLINER
PLACING CHAIR IN TRENDELENBURG (ATTENDANT ONLY)
1
2-3
TRENDELENBURG TO RECLINE (ATTENDANT ONLY)
1
Trendelenburg is a medical patient positioning treatment. It should ONLY be used by
trained personnel AND where indicated by patient condition.
IMPORTANT