Page 28 of 49
Document No.: 006020
Revision: P
OWNERS OPERATING & MAINTENANCE MANUAL
PHLEBOTOMY COLLECTION
1. To remove drawer, open drawer until the drawer stops. Using your finger, locate the drawer stop tab
mounted to the bottom of the drawer top. Press the tab against the drawer top and slide the drawer
past the tab. (
FIG 1
)
2.
To reinstall the drawer, insert the rear part of the drawer past the drawer stop, then slide the drawer
into the frame. (
FIG 2
) Bin dividers can be installed into the grooves as needed (
FIG 2
)
FIG 1
FIG 2
REMOVING AND RE-INSTALLING CABINET DRAWER
* MODEL 2574
