Page 23 of 49
Document No.: 006020
Revision: P
OWNERS OPERATING & MAINTENANCE MANUAL
PHLEBOTOMY COLLECTION
UNITY BDC: MODEL 2574/2575
1.
Place chair on side and install four (4)
Glide Feet
in threaded holes on the bottom of the
Chair
Frame
(
FIG. 6 & 7
).
2.
Lift and position the chair to the upright position, with
Glide Feet
on a level floor.
3.
If the
Chair Frame
does not sit level on the floor, loosen select
Glide Feet
individually as needed to
achieve stable, level positioning of the chair.
4.
Continue adjusting until the
Chair Frame
is level and stable.
Fig 6
Fig 7
x4
x4
GLIDE FOOT INSTALLATION
SHOWN
: Model 2574 Unity BDC with Cabinet
SHOWN:
Model 2575 Unity BDC with Standard Arm
2574 / 2575
