3
1. GENERAL INFORMATION
1-1. Introduction and Description
This manual explains the installation, operation and maintenance of the
ACOM2000SW remote 10 way antenna switch.
The ACOM2000SW is a remote 1 out of 10 antennas switch especially de-
signed for use with the ACOM2000S automatic antenna selector and the
ACOM2000A automatic HF linear amplifier. Nevertheless, the
ACOM2000SW can be easily integrated in other automatic antenna systems
or manually controlled, too.
1-2. Owner Assistance
If assistance is needed, you should contact your local dealer first. If you still
have an issue, you need to discuss with one of ACOMs specialists. The
contact information is as follows: fax (+359 2) 920 96 56, e-mail
[email protected], [email protected] or by mail: blvd.Nikola Mushanov
151, 1330 Sofia, Bulgaria.
1-3. Equipment Supplied and Options
The ACOM2000SW remote antenna switch plus a mating cable connector
for input control and power supply, 11 plastic protective caps, and this manual
are shipped in one cardboard carton. The automatic antenna selector
ACOM2000S is a separably purchasable option. If you have purchased it,
the same carton will contain both units.
1-4. Features
* One out of 10 antennas, 50 Ohm, up to 60MHz frequency range.
* Up to 5kW continuous carrier: Teflon (PTFE) insulated connectors for
100% duty cycle (continuous) operation.
* Gold plated and bifurcated contacts for excellent reception, no contact -
derived cross - modulation phenomenon.
