Press
Output Freq
to output the selected frequency.
This frequency is output until you select another fre-
quency from the list and press
Output Freq
. On
the frequency list, the output frequency selection is
marked by a black square or, if tagged, an
F
high-
lighted in reverse video.
When you are finished, press
Previous Menu
to re-
turn to the CW Frequency Control menu display.
Scanning Tagged Frequencies–To go to the
Tagged Frequencies menu (below) from the CW Fre-
quency Control menu, press
Tag Freq Menu
.
This menu lets you select the tagged frequencies for
output using the
Scan Up
and
Scan Dn
keys.
Return to the CW Frequency Control menu by press-
ing
Previous Menu
.
Selecting a
Power Level
While in the CW frequency mode, you can edit the
current CW frequency output power level or enter a
new output power level.
Editing the Current Power Level
Press
Edit L1
to open the power level parameter,
then edit the current power level using the cursor
control key or rotary data knob. To close the open
power level parameter, press
Edit L1
or make an-
other menu selection.
Entering a New Power Level
Press
Edit L1
to open the power level parameter,
then enter the new power level using the keypad
and appropriate terminator key. To close the open
power level parameter, press
Edit L1
or make an-
other menu selection.
LOCAL (FRONT
CW FREQUENCY
PANEL) OPERATION
OPERATION
681XXB OM
3-21
