STEP 1:
Select Mounting
Location & Assemble the
Outside Antenna
STEP 2:
Mounting the
Outside Antenna
STEP 5:
Connect Power
Supply To Booster
STEP 4:
Booster Location
& Connect Cables
STEP 3:
Mounting the
Inside Antenna
Find a location to place the
Drive Reach
Booster
and secure it with provided bracket.
Connect cable
from Outside Antenna
to
labeled booster port and
connect cable
from
Inside Antenna
to labeled booster port.
Identify a place to mount the
In-Vehicle
Antenna, either on the side of the seat
or on the dash
and mount. The location
should be at least 18 inches but no
more than 36 inches from where the
cellular device will be used.
Once you have determined the best location
for the
Outside Antenna
, insert cable through
mast(s)
then through
Side Exit Adapter
.
Screw together as shown.
Refer to Installation Guide for Detailed Instructions.
®
from Inside
Antenna
from Outside
Antenna
Booster
If the vehicle does not have built-in
mounting points, a
Three-way Mount
is included that will work on vehicles
with mirror rails.
For more info on
using Spring, see Installation Guide.
Connect the power supply cord
to the end
of the booster, labeled “
”, and plug
the power adapter into vehicles 12V DC
power supply. Enjoy your boosted signal!
cable
cable
cable
cable
cable
cable
cable
cable
cable
cable
cable
cable
cable
cable
cable
Different Assembly Options
3-Way Mount
shown
Side Exit
Adapter
Mast
t
o
Bo
o
ste
r
Side Exit
Adapter
mast
mast
Drive OTR
Outside Antenna
c
ab
le
f
ro
m
a
n
t
enn
a
In-Vehicle
Antenna
Velco
®
