background image

Amplifier

Amplifier

Installation

Guide

stallatio

stallat

In-Building
Wireless
Amplifi er

Contents:

Guarantee and Warranty · · · · · · · · · · · · · · · · · · · · · · · ·   1
Antenna Options and Accessories · · · · · · · · · · · · · · · · ·   2
Before Getting Started / How It Works · · · · · · · · · · · · · ·   2
Installation Overview · · · · · · · · · · · · · · · · · · · · · · · · · · · ·  3
Installation Diagram · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·  3
Installing a Wilson Amplifi er  · · · · · · · · · · · · · · · · · · · · · ·  4
Powering Up a Wilson Amplifi er  · · · · · · · · · · · · · · · · · · ·  5
Understanding the Amplifi er Lights · · · · · · · · · · · · · · · · ·  5
Warnings and Recommendations  · · · · · · · · · · · · · · · · ·  6
Finding Signal Strength and Coverage Distance · · · · · · ·  6
Amplifi er Specifi cations  · · · · · · · · · · · · · · · · · · Back Cover

Wilson

®

         Electronics, Inc.

Warning: 

This manual contains 

important safety and operating information. 
Please read and follow the instructions 
in this manual. Failure to do so could be 
hazardous and result in damage to your 
amplifi er.

!

Summary of Contents for 271247-50









Reviews: