background image

Amplifier

Installation

Guide

SOHO Wireless

Dual-Band

Cellular / PCS

Amplifier

MODEL# 271245

PART# 801245

Contents:

Guarantee and Warranty · · · · · · · · · · · · · · · · · · · · · · · ·  1

Antenna Options  · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·  2

How It Works · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·  3

Before Getting Started · · · · · · · · · · · · · · · · · · · · · · · · · ·  3

Installation Overview  · · · · · · · · · · · · · · · · · · · · · · · · · · ·  3

Installing the Outside Antenna  · · · · · · · · · · · · · · · · · · ·  4

Installing the Inside Antenna  · · · · · · · · · · · · · · · · · 

5

Installing the Amplifier  · · · · · · · · · · · · · · · · · · · · · · · · · ·  6

Powering up a Wilson Amplifier  · · · · · · · · · · · · · · · · · · ·  7

Understanding the Amplifier Lights · · · · · · · · · · · · · · · · ·  8

Warnings and Recommendations · · · · · · · · · · · · · · · · · ·  9

About Wilson Electronics · · · · · · · · · · · · · · · · · · · · · · · ·  10

Amplifier Specifications · · · · · · · · · · · · · · · · · ·  Back Cover

Wilson

®

         Electronics, Inc.

Warning: 

This manual contains 

important safety and operating information. 

Please read and follow the instructions 

in this manual. Failure to do so could be 

hazardous and result in damage to your 

amplifier.

!

Summary of Contents for 271245













Reviews: