English
Installation and operating instructions Wilo-SiFire Easy
59
10.7 HMI for diesel pump (description)
Description
1
Low oil pressure
2
Overheating
3
Broken belt alarm - no battery charging
4
Oil/water heater failure
5
Manual start-up test light and button
6
Automatic mode switched off
7
Motor pump stop button
8
Diesel pump running
9
Start-up call from pressure switches
10
Start-up call from float in priming tank
11
On-site commissioning test
12
Manual motor pump start with batteries A and B (always active)
13
Reset alarms
14
Battery charger working
15
Anomalies on battery charging detected by battery charger
16
No mains power to battery charger - alarm
17
Cumulative alarms
18
Push briefly to view tools - keep it pushed through for LED test
19
Rev counter
20
Timer
21
Battery chargers A and B voltmeters
22
Battery A or B alarm
23
Start failure alarm
24
Fuel level alarm
Fig. 15
om_sifire_easy__4206362_ed02__1801_de_en_fr.book Seite 59 Freitag, 2. Februar 2018 10:23 10
