English
56
WILO SE 01/2018
10.3 HMI for electric pump
Description
1
Motor running, checked by ammeter reading
2
Electric pump running detected by Ampere of the motor
3
Start failure
4
Start-up call received from pressure switches
5
Start-up call received from float in priming tank
6
Manual start button
7
Electric pump started via button
8
Electric pump stopped via button
9
Manual stop button
10
Automatic mode switched off
11
Push to view tools
12
Pump start-up call
13
Power on
14
Cumulative alarms
15
LED Test - reset
INSTRUMENTS
Push button 11 on Fig. 13 to see the values
Three mains voltmeter
For three-phase voltage up to 570 V
Amperemeter
To check Ampere on the phase of electric motor
Wattmeter
Varmeter
Voltammeter
Displays apparent power up to 750 kVA
Cosphimeter
Total and partial hour meter
Displays hours and minutes
Fig. 13
om_sifire_easy__4206362_ed02__1801_de_en_fr.book Seite 56 Freitag, 2. Februar 2018 10:23 10
