English
28
WILO SE 03/2018
Notes applied directly on the product must be strictly complied with
and kept in legible condition. These include:
• Direction of rotation arrow
• Identifiers for connections
• Name plate
• Warning sticker
2.2
Personnel qualifications
The installation, operating and maintenance personnel must have the
appropriate qualifications for this work. Area of responsibility, terms
of reference and monitoring of the personnel are to be ensured by the
operator. If the personnel are not in possession of the necessary
knowledge, they are to be trained and instructed. If need be, this can
be accomplished by the manufacturer of the product at the request of
the operator.
2.3
Danger in the event of non-
observance of the safety
instructions
Non-observance of the safety instructions can result in risk of injury
to persons and damage to the environment and the product/unit.
Non-observance of the safety instructions results in the loss of any
claims to damages.
In detail, non-observance can, for example, result in the following risks:
• Danger to persons from electrical, mechanical and bacteriological
influences
• Damage to the environment due to leakage of hazardous materials
• Property damage
• Failure of important product/unit functions
• Failure of required maintenance and repair procedures.
2.4
Safety consciousness on the job
The safety instructions included in these installation and operating
instructions, the existing national regulations for accident prevention
together with any internal working, operating and safety regulations
of the operator are to be complied with.
2.5
Safety instructions for the operator
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
• If hot or cold components on the product/the unit lead to hazards,
local measures must be taken to guard them against touching.
• Guards protecting against touching moving components (such as the
coupling) must not be removed whilst the product is in operation.
• Leakages (e.g. from a shaft seal) of hazardous fluids (e.g. explosive,
toxic or hot) must be conveyed away so that no danger to persons or
to the environment arises. National statutory provisions are to be
complied with.
• Highly flammable materials are always to be kept at a safe distance
from the product.
• Danger from electrical current must be eliminated. Local directives or
general directives [e.g. IEC, VDE etc.] and local energy supply compa-
nies must be adhered to.
2.6
Safety instructions for installation
and maintenance work
The operator must ensure that all installation and maintenance work is
carried out by authorised and qualified personnel, who are sufficiently
informed from their own detailed study of the operating instructions.
Work to the product/unit must only be carried out when at a standstill. It
is mandatory that the procedure described in the installation and oper-
ating instructions for shutting down the product/unit be complied with.
Summary of Contents for SiClean Comfort 12
Page 2: ...Fig 1 1 10 11 5 6 4B 4A 3 2 8 9 7 Fig 2 5 4 1 2 3...
Page 3: ...Fig 3 3 6 2 4 5 1 1...
Page 4: ...Fig 4...
