Wilo Atmos GIGA-B, Installation And Operating Instructions Manual

Page: 65 / 68

Disposal en
Installation and operating instructions Wilo-Atmos GIGA-I/-B 65
No. Part Details No. Part Details
1.11 Nut 3 Pump housing (kit) with:
1.12 Conical spring
washer 1.14 O-ring
1.13 Impeller 3.1 Pump housing (At-
mos GIGA-I/-B)
1.14 O-ring 3.2 Stopper for pressure
measurement con-
nections
1.2 Mechanical seal (kit)
with: 3.5 Screw plug for drain
hole
1.11 Nut
1.12 Conical spring
washer 4 Fastening screws for lan-
tern/pump housing
1.14 O-ring 5 Fastening screws for motor/
lantern
1.21 Mechanical seal 6 Nut for motor/lantern fixa-
tion
1.3 Lantern (kit) with: 7 Washer for motor/lantern
fixation
1.11 Nut
1.12 Conical spring
washer
1.14 O-ring
1.31 Air vent valve
1.32 Coupling guard
1.33 Lantern
1.4 Coupling/shaft (kit)
with:
1.11 Nut
1.12 Conical spring
washer
1.14 O-ring
1.41 Complete coupling/
shaft
1.42 Circlip
Table 7: Spare parts table
13 Disposal
13.1 Oils and lubricants
Operating fluid must be collected in suitable tanks and disposed of in accordance with
the locally applicable guidelines. Wipe up drips immediately!
13.2 Information on the collection of
used electrical and electronic
products
Proper disposal and appropriate recycling of this product prevents damage to the envi-
ronment and putting your personal health at risk.
NOTICE
Disposal in domestic waste is prohibited!
In the European Union this symbol may be included on the product, the packaging or
the accompanying documentation. It means that the electrical and electronic
products in question must not be disposed of along with domestic waste.