en
Product information
44
WILO SE 2022-06
WARNING! Misuse of the pump can lead to dangerous situations and damage.
ƒ
Never use fluids other than those approved by the manufacturer.
ƒ
Non-permitted substances in the fluid can destroy the pump. Abrasive solids (e.g.
sand) increase pump wear.
ƒ
Pumps without an Ex rating are not suitable for use in potentially explosive atmo-
spheres.
ƒ
Highly flammable materials/fluids should always be kept at a safe distance from
the device.
ƒ
Never allow unauthorised persons to carry out work.
ƒ
Never operate the pump beyond the specified limits of use.
ƒ
Never carry out unauthorised conversions.
ƒ
Use authorised accessories and genuine spare parts only.
Typical installation locations are technical rooms within the building with other do-
mestic installations. No provision has been made for direct installation of the pump in
rooms used for other purposes (residential and work rooms).
Outdoor installation requires a corresponding, special version (motor with anti-con-
densation heater). See chapter “Anti-condensation heater connection”.
5
Product information
5.1
Type key
Example:
Atmos GIGA-I 250/420-110/4/6
Atmos GIGA-B 125/315-45/4/6
Atmos GIGA-I
Atmos GIGA-B
Flange-end pump as inline single pump
Flange-end pump as monobloc pump
250
Nominal diameter DN of the flange connection in mm
(with Atmos GIGA-B: discharge side)
420
Impeller nominal diameter in mm
110
Rated power P2 in kW
4
Number of poles, motor
6
60 Hz version
Table 1:
Type key
5.2
Technical data
Property
Value
Note
Rated speed
Version 50 Hz:
ƒ
Atmos GIGA-I-B (2-/4-
pole): 2900 rpm or
1450 rpm
Depending on pump type
Rated speed
Version 60 Hz:
ƒ
Atmos GIGA-I/-B (2-/4-
pole): 3500 rpm or
1750 rpm
Depending on pump type
Nominal diameters DN
Atmos GIGA-I: 32 ... 250 mm
Atmos GIGA-B:
32 ... 150 mm (discharge
side)
Pipe and pressure meas-
urement connections
Flanges PN 16 in accordance
with DIN EN 1092-2 with
pressure measurement con-
nections Rp ⅛ in accordance
with DIN 3858.
Partially PN 25, depending
on the pump type
Permissible min./max. fluid
temperature
-20 °C ... +140 °C
Depending on fluid and
operating pressure (lower
temperatures partly on
request as special version)
Summary of Contents for Atmos GIGA-B
