Intended use and misuse
en
Installation and operating instructions Wilo-Atmos GIGA-I/-B
43
WARNING
Damaged transport lugs can break off and cause considerable personal
injury.
• Check the transport lugs before use for damage and secure fixation.
Transport pump
Transport motor
The transport eyes on the motor are only for transporting the motor, but are not au-
thorised for transporting the complete pump!
DANGER
Risk of fatal injury from falling parts!
The pump itself and pump parts can be extremely heavy. Falling parts pose a risk of
cuts, crush injuries, bruises or impacts, which can be fatal.
• Always use suitable lifting equipment and secure parts against falling.
• Never stand underneath a suspended load.
• During storage and transport, as well as before all installation and assembly work,
ensure that the pump is in a safe position and standing securely.
WARNING
Personal injury due to unsecured installation of the pump!
The base with the threaded holes is used for fixation only. When standing freely, the
pump might not be sufficiently stable.
• Never place the pump unsecured on the pump support feet.
4
Intended use and misuse
4.1
Intended use
The glanded pumps of the Atmos GIGA-I (in-line single pump), Atmos GIGA-D (in-line
twin-head pump) and Atmos GIGA-B (monobloc pump) series are intended for use as
circulators in building services.
They may be used for:
ƒ
Hot-water heating systems
ƒ
Cooling and cold water circulation systems
ƒ
Process water systems
ƒ
Industrial circulation systems
ƒ
Heat carrier circuits
Intended use includes compliance with these instructions as well as the information and
markings on the pump.
Any use beyond the intended use is considered misuse and will result in the loss of all li-
ability claims.
4.2
Misuse
The operational reliability of the supplied product is only guaranteed for intended use in
accordance with chapter "Intended use" of the installation and operating instructions.
The limit values must not fall below or exceed those values specified in the catalogue/
data sheet.
Summary of Contents for Atmos GIGA-B
