15
IR Plus Assistive Listening System
To set up a static IP Address:
1. Determine an appropriate static IP address for the IR M1.
a. If someone set up your network, they may be able to help you determine an appropriate IP address (i.e. network system
administrator).
b. There should be no other device having this same address on the network.
c. This will be an address on the same subnet as the router.
For example, if the router’s address is 192.168.1.100, the first three sets of numbers will be the same (i.e. 192.168.1), and the last
number will be the number you determine for the IR M1 (i.e. .You can choose another number instead of .100).
When you determine this address, remember or write it down. You will need it for a later step.
2. Set the Static IP Address for the IR M1 via the web interface of the IR M1 (see "Network Page" on page 20).
a. Enter the IP Address you determined earlier. (When entering/saving the new address, the IR M1 will automatically change its
IP Address Mode to STATIC)
b. Network settings in the IR M1 take place immediately after saving and rebooting.
Restore Defaults
The Restore Defaults action will restore the IR M1 to it’s original factory settings. Restoring defaults from the front panel of the IR M1
will reset all settings.
On the front panel menu, it is hidden on the main screen ("Main Menu" on page 22).
Restoring defaults from the web page will reset all settings except Network connectivity settings (IP Address, Subnet Mask, IP
Address Mode, and Web Password). This maintains connectivity between the Web Page and the IR M1, after the IR M1 reboots.
In the web interface, this feature is under the Admin menu.
Web Control Interface
The IR M1 provides a web interface to manage the device settings. These web pages can be accessed over either a hardwired or
wireless network connection with the Chrome browser.
Changes take effect when applied or saved. Any updates made through the front panel will show up on the web interface once
the current page has been navigated away from, either by refreshing the page or going to a new page.
1. Open Chrome.
2. In the address bar of the browser, type in the IP address of the IR M1 and hit Enter.
3. The web page will say 'Fetching Data' as it connects to the IR M1 and gathers data of every connected machine.
This may take
several seconds.
4. You should see the Login Page of the IR M1.
• If you only see a page asking for a firmware update, your device may have been corrupted. See "Website problems" on page
Login Page
The default User name is “admin” and the default password is “admin”. The user name and the password can (and should) be
changed on the website's Admin page.
Check with your system administrator for the most recent login credentials.