Truman Round Bar Cart
Assembly Instructions
1 / 2
Pre-Assembly
1. Please read all instructions carefully and completely before assembly.
2. Assembly by two people is recommended.
Parts included: (Not to scale)
Hardware/Tools included: (Not to scale)
Step 1.
Carefully open the packaging and clear packaging material from assembly area.
Place all components on a protective surface.
Step 2
.
Attach the bottom frame w/lip inside (B) to four pole legs (D), (E), align the holes and insert flat head Allen screws (G) into the
four holes, do not tighten until all four frames are fully assembled. Repeat the same procedures for the rest three frames (C), (B)
& (A). (Fig. 1)
Please note:
a. Pole legs (D) should be at the either end of top frame (A);
b. Tighten ALL of the flat head Allen screws (G) with Allen wrench (H) until TIGHT.
Part
Qty.
Description
A
1 pc
Top frame
B
2 pcs
Frame w/lip inside
C
1 pc
Frame w/o lip inside
D
2 pcs
Pole leg
(caster w/brake)
E
2 pcs
Pole leg
(Caster w/o brake)
F
2 pcs
Glass shelf
Part
Qty.
Description
G
16 pcs
Flat head Allen screw
H
1 pc
Allen wrench
G. Flat head Allen screw H. Allen wrench
A. Top frame B. Frame w/lip inside
C. Frame w/o lip inside
D. Pole leg
(caster w/brake)
F. Glass shelf
E. Pole leg
(caster w/o brake)