Date: 31‐Mar‐2016
www.williams‐sonoma.com
Page 4 of 4
Rev:
4. Install the drawer boxes back to the Desk top (A).
5. Attached the Anti-tip kit at the back and adjust the levelers underneath the four corners of the base as seen
in the illustration below
Adjusting the Levelers:
If the floor is uneven, the furniture may not sit level and the piece may wobble. If the furniture wobbles, determine
which corner does not touch the ground correctly. With two people follow the steps below:
-
Carefully elevate the item slightly, to provide access to the levelers attached to the bottom of each leg.
-
Turn the levelers (up or down) until adequate contact will be made with the floor. Gently set the piece down
and check stability.
-
Repeat the steps above, until furniture sits firmly on the ground.
6. Assembly is complete.
Care Instructions:
Dust often using a clean, soft, dry and lint-free cloth.
Blot spills immediately and wipe with a clean, damp, cloth.
We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
For glass tops and shelves, glass cleaner may be used, but avoid spraying it onto the metal or ceramic
frame.
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.
Thank you for your purchase
Stores | catalog
