Page 2 of 4
ASSEMBLY INSTRUCTIONS :
1.
Lay headboard (A)/footboard (B) down on a scratch free or carpeted surface. Attach the finials (C) and the feet
(D) to the headboard (A)/footboard (B) by inserting the bolts into the inserts on the headboard/footboard. Hand
tighten until snug (
Do not over tighten
) as shown in
fig. 1
,
illustration. 1 & 2
.
2.
Carefully turn the head board and foot board upright. Insert threaded rods (I) into the inserts in headboard posts
(A) and footboard posts (B) as shown
fig. 2
in
illustration. 3
.
3.
Attach the side rails (E) by inserting threaded rods (I) on the posts of the headboard and footboard into the holes
on the side rails (E) as shown
fig. 3
.
4.
Place curved washers (J), flat washers (M), spring washers (L) and nuts (K) onto the threaded rods (I). Tighten
with wrench (N) as shown in
illustration. 4
.
Illustration. 1
attach the finials
Illustration. 2
attach the feet
Fig. 1
Fig. 2
Fig. 3
A
D
B
D
C
Illustration. 3
Insert threaded
rod
Illustration. 4
attach side rail to HB & FB