Williams-Sonoma HAIR ON HIDE MIRROR SERENGETI BEIGE Assembly Instructions Download Page 4

Page: 4 / 4

Page 4 /4

4. Position the Hanging Bracket (D) against the wall and make sure that the holes are aligned with the

installed ITW Toggles (C). Insert the Toggle Screws (B) using the Philips Head Screw Driver

through the holes of the Hanging Bracket (D) by rotating clockwise to tighten. Continue until the 4

installed ITW Toggles are filled. Be patient, this will require several turns. Once screws are tight

then Hanging Bracket (D) installation is complete.

5. Hang the mirror frame (A) by aligning the metal plate found at the back to the installed Hanging

Bracket (D) on the wall either vertically or horizontally.

6. Assembly is complete

Summary of Contents for HAIR ON HIDE MIRROR SERENGETI BEIGE

Page 1: ...Page 1 4 HAIR ON HIDE MIRROR SERENGETI BEIGE ASSEMBLY INSTRUCTIONS Customer Service 877 812 6235www williams sonoma com...

Page 2: ...ging parts during assembly The shipping box provides an ideal work surface To avoid accidentally discarding small parts or hardware do not dispose of any packaging or contents of the shipping carton u...

Page 3: ...gauge if necessary making sure a flat and stable assembly 2 Use a pencil to mark the wall through the Hanging Bracket holes as seen in the illustration below These marks are the insertion points of th...

Page 4: ...et D by rotating clockwise to tighten Continue until the 4 installed ITW Toggles are filled Be patient this will require several turns Once screws are tight then Hanging Bracket D installation is comp...