Page
4
/5
7.
Attach the 2 Knobs (G) to the lower doors by inserting the 2 Short Bolts (H) to the back holes and gently
rotating the Knob (G) clockwise, as seen below.
8.
Use a Philips Head Screw Driver (not included) to tighten the assembly.
9. Use a level gauge to check if the Base Frame (B) is seated flat on the ground. If it is not level and it rocks,
adjust the levelers (in or out) until the cabinet sits firmly and level on the floor.
10. Remove existing dowel at the top of the leg posts before installing stone top. These dowels are only for the
white marble top.
Note: The base must be leveled before assembling the Stone Top (A).