Wilfa PH1S-2000, Instruction Manual

Page: 11 / 130

9
PATIO HEATER · PH1S-2000
EN
INSTALLATION
BEFORE THE INSTALLATION, THESE MATTERS NEED ATTENTION
1. The product should be put down gently.
2. Installations in acid and alkaline environment is not recommended.
3. The product must be grounded.
4. The products are required to check the product brand mark on the voltage
and the local voltage whether conform.
5. Ensure the power rating should have sufficient current carrying capacity.
6. The possible danger of installation close to curtains and other combustible
materials.
ENSURE THE PRODUCTION’S INSTALLATION SITE
For the safe use of the product, the product installation position should
guarantee the bottom minimum height of 1.8 m from the ground. Ceiling or
other coverings minimum distance is 0.5 m, minimum distance with both sides
wall is 0.5 m (as shown in figure 1).
Min. 0.5 m
Min. 0.5 m
Min. 1.8 m