Assembly Instructions
© 2017
LCC-207 Mission Glider
Required Tools:
- Hammer
- Cordless Drill
- #2 Square Drive bit
- 9/16” and 7/16” Wrench or
Socket
Hardware:
- (4) 1/4” x 2” bolts
- (2) 1/4” x 4” bolts
- (2) 1/4” x 3 1/2” bolts
- (8) 1/4” Flange Nuts
- (4) Glider Hangers
- (8) 3/8” x 2 1/2” bolts
- (16) 3/8” washers
- (8) 3/8” locknuts
- (4) 1 1/4” screws
- (8) 3” screws
www.wildridge.com
330-893-4212
Step 1
Position seat (B) and back (A) as shown
and fasten outside supports with (4) 2"
bolts & nuts. Use 1/2" x 1 1/2" x 5" con-
nector block provided to fasten center seat
support to the back using (4) 1 1/4"
screws.
Step 2
Fasten the arm leg assembly (C) in position shown
using 4" bolt & nut in back and 3 1/2" bolt & nut in
front. Repeat other side. Note: left & right.
A
B
C
C
D
D
E
