WSG18SFP Switch User Manual
WSG18SFP Switch User Manual
Page 17 of 27
Configuration table is displayed, allowing you to map each of the DSCP values to a hardware output queue (low,
normal, medium or high). The default settings map all DSCP values to the high priority egress queue.
You can use the Prioritize Traffic drop-down list to quickly set the values in the DSCP Configuration table to a
common priority queue. Use
if you want to set each value individually.
Custom
When the QoS Mode is set to DSCP, the DSCP Configuration table is displayed as shown below.
Filter Configuration
Administrators can easily assign IP addresses to the ports of the switch. Press
button after you make the
Apply
changes.
Source IP Filter: