WORKFORCE WI-FI DONGLE USER GUIDE
- ENGLISH
PACKING LIST
• 1 x WorkForce Wi-Fi Dongle
• 1 x Type-C adapter
Note: The dongle support starts from WorkForce firmware v. 65.145.0.220.
SAFETY INFORMATION
https://www.wildix.com/safety-information/
WI-FI DONGLE
CONNECTION
1. Connect WorkForce Wi-Fi Dongle to Type-C adapter
2. Plug the Wi-Fi Dongle into WorkForce USB Type-C port
3. The Wi-Fi Dongle connection LED indicator turns steady
blue when connected
Notes:
• Wi-Fi Bridge mode is not supported
• WorkForce with a connected dongle requires
at least 5V 2A power source
NETWORK CONNECTION
To connect WorkForce to a Wi-Fi network:
1. Press
Menu
soft key on WorkForce
2. Go to
Network
menu and select
WLAN
option
3. Enable Wi-Fi connection: use
Navigation
keys or press
Switch
soft key to change Wi-Fi
connection status from
Disable
to
Enable
; press
Save
soft key
4. Searching for Wi-Fi Networks is in progress. After it is completed, there is a list of all available
networks
5. Select a Wi-Fi network from the list and press
Connect
soft key
6. Enter password and press
Save
soft key
7. WorkForce is now connected to the Wi-Fi network
Version 11/2020
Page of
1
1
Full guide online:
www.wildix.com
