WHS, Mono|DuoLED, WelcomeConsole-EXT, WPEHS - Quick Start Guide - Phones Accessories
WHS, Mono|DuoLED, WelcomeConsole-EXT, WPEHS - Quick Start Guide - Phones Accessories
Page 3 of 11
1 x USB charging cable
Quick Start Guide
Description of buttons:
Charging
Use the USB cable provided to charge the headset:
When charging, the red LED is on
When approaching the full battery level, the red LED goes down and the green LED turns on
When charging is complete, the LED goes down
Turn on
Proceed as follows:
Move the switch to the position 1
The blue and green LEDs flash several times
Turn off
Move the switch to the position 0
Connection to WP600A/ACG, Vision, SuperVision
Make sure the headset is switched on, then proceed as follows:
Press and hold the receiver button
, until the blue LED starts flashing
Go to the Wildix WP phone’s
and move the switch to
Settings menu -> Wireless & Networks -> Bluetooth
the position ON
Select WHS-BT from the list of AVAILABLE DEVICES
When connected, the headset’s blue and green LEDs turn on for several seconds and a voice prompt says "
Connected".
