W01GSM - Quick Installation Guide - English
W01GSM - Quick Installation Guide - English
Page 2 of 3
LED indicator
State
Description
RUN
ON
device is booting
Slow blinking
device is not registered
Fast blinking
device is registered
GSM
ON
device is booting / call in progress
OFF
SIM card is not registered / incorrect PIN / no coverage
Slow blinking
SIM card is registered
Interface
Description
WAN
WAN indicator blinks if device is connected even if it’s not registered
RST
Press and hold for over 6 seconds using a paper clip to restore to the factory defaults
SIM slot
Press the yellow button to open the card slot and insert the SIM card
ANT
3dB external antenna
Installation and connection
Make sure the PIN code of the SIM card is disabled.
Screw the antenna into the ANT jack plug of the gateway (antenna with a longer cable is available as a
separate product: code: W01GSM-ANT)
Insert the SIM card (press the yellow button to make the SIM tray pop out)
Connect the WAN interface of the gateway to the PoE switch
Provisioning and configuration
