4/20/2017
W01/02/04FXS – Quick Installation Guide
The steps below help you to connect and configure the W01FXS, W02FXS and W04FXS media gateways. FXS
gateway allows you to connect analog phones and fax machines to your IP PBX.
Updated: March 2017
Quick Overview
Connection to power supply (old models without PoE)
Connection to Ethernet
Connection to the line
Provisioning of the gateway
Assign analog ports
Reset of the gateway
Quick Overview
Rear panel
Reset button
Power supply jack
Input: AC100V~240V, 50/60Hz
Output: DC 12V, 1.5A (W04FXS) or 1A (W01FXS)
Network ports
2 Ethernet ports RJ-45, 10/100 base-T
1 WAN port
1 LAN port configured in Bridge
FXS ports
1, 2 or 4 FXS ports (depending on the model), to connect to analog phone
Front panel
1
Power
LED indicates that the gateway is powered
1
Status
LED indicates that the system is startup successfully
1
Proxy
LED indicates that the gateway is registered on SIP proxy (W04FXS only)
1
LAN
LED indicates that the gateway is connected to the network via this port
1
WAN
LED indicates that the gateway is connected to the network via this port
Phone LED (1 for W01FXS and 4 for W04FXS)
indicate that analog phones are connected:
flashing LED indicates an incoming call
LED is ON indicates that the connected phone’s handset is lifted or the phone is engaged in a
1/4
Summary of Contents for W01 FXS
Page 4: ...4 4 ...
