W-PA SIP Public Announcer - Admin Manual
W-PA SIP Public Announcer - Admin Manual
Page 4 of 7
1.
2.
3.
1.
WMP provisioning: (the simplest mode) can be applied also for Cloud PBX and for connecting remote
devices (assign devices to the PBX from the Portal)
Auto-provisining: for local devices (cannot be used for Cloud PBX and for remote devices behind NAT /
Firewall)
Remote provisioning: this mode can be used for Cloud PBXs and for connecting remote devices behind
NAT / Firewall
Refer to the chapters
of the guide
Provisioning of Wildix devices
WMP and auto-provisioning details.
Refer to the chapter
Remote provisioning of Wildix devices
provisioning details.
Assign to user
To assign a user to your W-PA SIP Public Announcer:
Go to WMS -> Devices
Choose your W-PA from the list of available devices and click Assign to user
Enter the extension number of a user you want to assign the device to
Public Announcer function via Intercom/ Paging
Once the device is installed and configured, you can use it as a Public Announcer for broadcasting purposes.
To broadcast a message via W-PA:
First, you need to set up a Dialplan to enable the device to answer calls automatically. For this purpose,
use Intercom/ Paging group Dialplan applications. The detailed information about Dialplans can be found
Dialplan applications Admin Guide
Example of Dialplan configuration:
where 112 - the extension number of W-PA user
Note: you can assign W-PA to an existing user or create a new one in WMS -> Users.
Note: In case you have configured failover PBX for your main PBX, the W-PA will have 2 SIP accounts.
Note: to use the device for broadcasting purposes, any external speakers/ microphones should be
connected to it.
Note: W-PA SIP Public Announcer
supports Paging over RTP multicast. Consult
