DaySaver Quick Installation Guide
DaySaver Quick Installation Guide
Page 6 of 15
: DaySaver is placed between the router and the whole network of the customer. In
Backup for an entire office
case the office internet connection goes down, all traffic starts working via DaySaver:
Enable VoLTE
VoLTE Network allows using DaySaver as a backup for Cloud PBXs, as a backup for the cable Internet
connection, or, even as the only Internet access for small offices or during the events.
To activate VoLTE, proceed with the following steps:
Go to
->
Network
VoLTE
Check off
in Status field
Enable
Click Save
Confirm by clicking Apply
Set uplink config