Wilan LIBRA 5800 AP, User Manual

Page: 87 / 156

Using the Command Line
June 2003 Rev 0 87
➧
To display a list of available commands
Type
help
to display a list of commands.
List of Commands
Command Explanation Example
help
Shows the following command summary list:
menu cls dir del ping linktest logout exit quit wilan>help menu
menu
Returns to the configuration menus
wilan>menu
cls
Clears the terminal screen
wilan>cls
dir
Shows a file directory
wilan>dir
del <name>
Deletes a file called <name>
wilan>del sample.txt
ping <name>
Pings a remote IP address called <
name
>
wilan>ping 198.168.200.5
linktest
Runs the Linktest utility
wilan>linktest 2
logout
Logs out of the command line interface
or terminates a remote telnet session
wilan>logout
peek
Displays the contents of a block of memory
wilan>peek 9000
rebootnewest
Reboot the latest master image downloaded
onto the unit (in regards to time, not image
version)
wilan>rebootnewest
rebootcurr
Reboot the current master image running on the
unit
wilan>rebootcurr
crc
Displays CRC values for Wi-LAN image files. If
the file is a master image the CRC for each
component sub-section is displayed.
wilan>crc
exit
Leaves the command line interface or
terminates a remote telnet session
wilan>exit
quit
Logs out of the command line interface or
terminates a remote telnet session
wilan>quit
wilan> help
Command Summary:
menu cls dir del ping linktest
logout exit quit
display help for a specific command:
help <name>
wilan>