IP/MBR Filter Configuration
81
4. Press the right arrow key on the keyboard to move to the
Host/Net Address
field and press
Enter
.
The entry field highlights.
5. Type the IP Address of the Host/Net and press
Enter
. You have defined the IP Address.
6. Press the right arrow key on the keyboard to move to the
Host/Net Mask
field and press
Enter.
The entry field highlights.
7. Type the IP Address of the Host/Net Mask and press
Enter
.
8. Repeat steps to create additional IP filters.
Setting the MBR Filtering Option
You can set the IP Filtering Option to
IP Filtering with MBR
to enforce a maximum allowable
burst rate for a given CPE. The factory default is
Disable
. When set to
IP Filtering with
MBR
, any packets other than IP and ARP are rejected and the maximum burst rate for the CPE is
enforced.
➧
To set the MBR Filtering option
1. From the Main System Menu, select
IP/MBR Filter Configuration
and press
Enter
.
The IP/MBR Filter Configuration menu appears.
2. Select
IP Filtering Option
. The field highlights.
Summary of Contents for LIBRA 5800 AP
