Wilan LIBRA 5800 AP, User Manual

Page: 61 / 156

System Commands
June 2003 Rev 0 61
➧
To reboot the current image
1. From the Main System Menu, select
System Commands
and press Enter .
The System Commands menu appears.
2. Select
Reboot Current Image
and press Enter . The Libra 5800 unit reboots using the
current image.
Rebooting a System Image
Any image in the System Software ROM Images menu including the current one may be used for
rebooting. When you reboot a system image, the system reboots with a new image of your choice,
but this does not change the default image. This is useful for testing an upgrade. If a new image fails
to boot the last running image will be booted.
➧
To reboot a system image
1. From the Main System Menu, select
System Commands
and press Enter .
The System Commands menu appears.
2. Select
Reboot a System Image
. The field highlights.
3. Use the up and down arrows to select the image you want to use and press Enter . The Libra
5800 unit reboots using the selected system image.
System Commands
Set Default System Image lib5800-3-2-0.wil
Reboot Current Image Press Enter to Execute
Reboot a System Image lib5800-3-2-1.wil
Restore Factory Configuration Press Enter to Execute
Restore Poweron Configuration Press Enter to Execute
Reset MAC Layer Statistics Press Enter to Execute
System Commands
Set Default System Image lib5800-3-2-0.wil
Reboot Current Image Press Enter to Execute
Reboot a System Image lib5800-3-2-1.wil
Restore Factory Configuration Press Enter to Execute
Restore Poweron Configuration Press Enter to Execute
Reset MAC Layer Statistics Press Enter to Execute