33
WIKA operating instructions process transmitter, model UPT-2x
14068347.01 06/2014 GB/D
GB
9. Configuration via display and operating unit
9.2
Setting the units
9.2.1
Setting the pressure unit
1.
Open the operating menu with [↵].
Select “Basic setting” and confirm with [↵].
2.
Select “Application” and confirm with [↵].
3.
Select “Pressure” and confirm with [↵].
4.
Select “Unit” and confirm with [↵].
5.
Select pressure unit and confirm with [↵].
Pressure unit is set.
9.2.2
Set length unit (for level measurement)
1.
Open the operating menu with [↵].
Select “Basic setting” and confirm with [↵].
2.
Select “Application” and confirm with [↵].
3.
Select “Level” and confirm with [↵].
4.
Select “Unit” and confirm with [↵].
5.
Select length unit and confirm with [↵].
Length unit is set.