background image

10

WIKA operating instructions analog pressure transducer, model CPT6030

PN 0020508001A  03/2020  EN

 EN

3.6  Personal Protective Equipment

The personal protective equipment is designed to protect the skilled personnel from hazards that could impair their safety or health 

during work. When carrying out the various tasks on and with the instrument, the skilled personnel must wear personal protective 

equipment.

Follow the instructions displayed in the work area regarding personal protective equipment!

The requisite personal protective equipment must be provided by the operating company.

Wear safety goggles!

Protect eyes from flying particles and liquid splashes.

Wear a protective helmet!

Protects the head from falling objects.

Wear safety shoes!

Protect feet from falling objects or objects lying around, as well as against toxic or hazardous liquids and aggressive 

media.

3.7  Labeling, Safety Marks

3.7.1  Product Label

CPT6030

0...100

psig

0.025% FS

SN:41000MDJ

4...20 mA @ 15...28 VDC

DOM: 3.20

EU Importer

Made in San Marcos, TX USA

23 mA Max

1

2

3

5

4

6

7

8

1

Model

5

Power Requirements

2

Range

6

Symbols

3

Accuracy

7

Date of Manufacture

4

Serial Number

Importer Origin

8

Safety

Summary of Contents for Mensor CPT6030



























Reviews: