7
Operating instructions wire rope force transducer, model F9204
ADPR1X914116.01 04/2020 EN/DE
EN
2. Design and function / 3. Safety
3.4 Intended use
The wire rope force transducers are designed for measuring static compression forces.
Model
Version
F9204
Measuring ranges 0 … 1 t to 0 ... 40 t, wire rope diameter 6 ... 48 mm
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
The technical specifications contained in these operating instructions must be obser-
ved. Improper handling or operation of the instrument outside of its technical specifica-
tions requires the instrument to be taken out of service immediately and inspected by an
authorised service engineer.
These instruments have been designed and tested in accordance with the relevant
safety regulations for electronic measuring instruments. Any usage outside of this is
deemed to be improper. The perfect functioning and operational safety of the transdu-
cers can only be guaranteed when complying with the instructions given in the operating
instructions. During its use, the legal and safety regulations (e.g. VDE 0100) required for
the particular application must additionally be observed.
Handle electronic precision measuring instruments with the required care (protect from
humidity, impacts, strong magnetic fields, static electricity and extreme temperatures,
do not insert any objects into the instrument or its openings). Plugs and sockets must be
protected from contamination.
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.
3.5 Improper use
WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous situations and
injuries.
▶
Refrain from unauthorised modifications to the instrument.
Any use beyond or different to the intended use is considered as improper use.
