7
EN
ADPR1X914112.01 09/2020 EN/DE
WIKA operating instructions, model F2812
3. Safety
3.2 Intended use
The tension/compression force transducers are designed for measuring static and
dynamic tension and/or compression forces.
Model
Version
F2812
Version for measuring ranges 0 ... 50 N to 0 ... 1 kN
These instruments have been designed and tested in accordance with the relevant
safety regulations for electronic measuring instruments. Any usage outside of this is
deemed to be improper. The perfect functioning and operational safety of the trans-
ducers can only be guaranteed when complying with the instructions given in the
operating instructions. During its use, the legal and safety regulations (e.g. VDE 0100)
required for the particular application must additionally be observed. This also applies
accordingly when using accessories. Tension/compression force transducers are RoHS-
compliant in accordance with Directive 2011/65/EU. Faultless and safe operation of this
transducer requires proper transport, professional storage, installation and mounting as
well as careful operation and corrective maintenance.
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly. The technical specifications contained in these
operating instructions must be observed. Improper handling or operation of the instru-
ment outside of its technical specifications requires the instrument to be taken out of
service immediately and inspected by an authorised service engineer.
Handle electronic precision measuring instruments with the required care (protect from
humidity, impacts, strong magnetic fields, static electricity and extreme temperatures,
do not insert any objects into the instrument or its openings). Connectors, stranded
wires and sockets must be protected from contamination.
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.
