EN
WIKA operating instructions, model CTR3000
49
14191761.01 05/2019 EN/DE
6. Commissioning, operation
6.4.5.2 Log files
The instrument itself has a capability of approx. 1.4 Mio values. If the storage is full, no log files will be overwritten. An error log
rises up and requests to delete data from the instrument.
By pressing the button
[Start]
a new log is created and named under log files with a time/date stamp according to the set
time/date format. If a start or duration time is selected the button displays also the time until the log starts and then shows the
remaining time until it stop.
While clicking on the created log file in the list, the log data will be viewed on the right side and will be updated after every
recorded value (the values will be added on the top, that the newest value is always visible).
By pressing the button
[Stop]
the log is done and stored completely under log files.
Delete, download function of log files
By clicking on an existing log file the values appear on the right side. The head line displays the name of the log file.
In addition the buttons
and
are active.
An active log file cannot be downloaded and deleted!
1. Press the log file you want to edit.
2. Then press the button
or
.
⇒
For download, make sure that a USB memory stick is inserted in the front end USB! When the download is completed,
please ensure that you eject the USB memory stick properly via the button
in the status line. More details in
chapter 6.5 “Download function”
