9
WIKA operating instructions, model CTD9100-1100
14030725.02 08/2019 EN/DE
EN
4. Design and function
1
Cooling LED
Lights up when the calibrator is cooling
2
Switch-test LED
Lights up when the temperature switch is closed
3
Display 1
Indication of the current temperature or unit
4
Display 2
Indication of set temperature
In the function menu the parameter will be displayed
5
Button [E]
Confirming the value
6
Button [▼]
Decreasing the value shown on display 2.
Holding down the button
[▼]
will decrease the speed.
7
Button [▲]
Increasing the value shown on display 2.
Holding down the button
[▲]
will increase the speed.
8
Function menu button [M]
By pressing the buttons
[M]
and
[▲]
to enter the
SETUP menu
9
Heating LED
Lights up when the calibrator is heating
Further definitions
[XXX]
Press XXX button
XXX
Menu XXX will be displayed
10
RS-232 interface
11
Temperature switch-test
12
Overtemperature LED
10
11
12
4.2 Description of the operating elements
Front of the controller
Overview of the operating elements on the front of the controller
5
4
3
2
1
9
8
7
6