26
WIKA operating instructions, model CPH6200
EN
11221780.03 07/2022 EN/DE
6.4.10 Alarm (
AL
.
)
There are 3 possible settings: off =
“
AL
.
oFF
”
, on =
“
AL
.
on
”
, or on =
“
AL
.
no
.
So
”
.
Under the following conditions, an alarm is given when the alarm function
“
AL
.
on
”
or
“
AL
.
no
.
So
”
is active:
■
Value is below lower alarm limit
“
AL
.
Lo
”
or above upper alarm limit
“
AL
.
Hi
”
.
■
Sensor error (
Sens
Erro
)
■
Low battery,
'
At
'
■
Err
.
7
: System error
In the event of an alarm, the display flashes and the instrument beeps. If the serial
interface is used, the 'PRIO' flag is used.
6.4.11 Real-time clock (
CLOC
)
The real-time clock is needed for the time allocation of the logger data. If required, check
the settings.
Checking the real-time clock
1. Press the
[SET/MENU]
button for 2 seconds.
⇒
The main menu
“
SEt
”
is accessed.
2. Keep pressing the
[SET/MENU]
button until
“
SEt
CLOC
”
is displayed.
3. With the
[▶/TARA]
button, select the
“
CLOC
”
parameters.
4. With the
[▼/MIN]
or
[▲/MAX]
buttons, enter the time.
5. With the
[▶/TARA]
button, select the
“
YEAr
”
parameters.
6. With the
[▼/MIN]
or
[▲/MAX]
buttons, enter the year.
7. With the
[▶/TARA]
button, select the
“
dAtE
”
parameters.
8. With the
[▼/MIN]
or
[▲/MAX]
buttons, enter the day and month.
9. With the
[STORE/QUIT]
button, confirm the entry.
10. Press the
[SET/MENU]
button.
⇒
Return to main menu.
After changing the battery, the menu for setting the clock is automatically started after
switching on the instrument.
6. Commissioning, operation
