EN
14392029.02 08/2020 EN/DE
Operating instructions magnetostrictive level transmitter, models FLM-xAI, BLM-TAI (Ex)
34
10.3 Model BLM-TAI
Specifications
Connection housing (sensor
housing)
Stainless steel 1.4305, optionally stainless steel 1.4404
Sensor tube
Stainless steel 1.4571, optionally stainless steel 1.4404
Tube Ø 12 mm, tube length L max. 6,000 mm
Medium temperature
-60 ... +450 °C
Ambient temperature
T4/T5/T6: -20 ... +85/+55/+40 °C
Output signal
4 ... 20 mA, HART
®
Supply voltage
DC 10 ... 30 V
Measurement accuracy
< ±0.5 mm
Resolution
< 0.1 mm
Ingress protection
IPx6, IP68
For further specifications see data sheet LM 10.05 and the order documentation.
10.4 Float
The float is an essential component of the level transmitter, which must be matched to the
medium in terms of density, pressure strength and material resistance.
The floats listed below are interchangeable and can be reordered individually. Further float
models and materials are available on request.
▶
The density and magnet position of floats of the same type vary slightly, so that
readjustment may be necessary.
▶
All floats can also be used with a pressure of -1 bar (vacuum).
Material
Version
Description
For guide tube
Ø in mm
Limit density
85 % in kg/m
3
Stainless steel
1.4571 (316Ti)
V18/42A
Cylinder Ø 18 mm
6
800
V27A
Cylinder Ø 27 mm
6
700
V29A
Sphere Ø 29 mm
6
920
V29A/40
Cylinder Ø 29 mm
12
620
V44A
Cylinder Ø 44 mm
12
720
V52A
Sphere Ø 52 mm
12
690
Titanium 3.7035
(grade 2)
T29A
Sphere Ø 29 mm
6
700
10. Specifications
