Operating light
Touch screen
Tray
Power switch
Cartridge slot
USB
Power port
FRONT
BACK
Preparation
1
Please complete the following steps before turn it on
Note: Customer can upload image through th is URL or QR co de
2
3
4
5
①
Please take out the protecting foam from position A
Please conncet to the electricity (As shown in figure 2
）
Please install
Connect WiFi
Obtain the unique machine URL and QR code under
Settings Interface
figure 2
A
Protecting foam
figure 1
Attention: Please stu
ff
back the protecting foam before transit
（
As shown in figure 1
）
Introduction
Usage
1
2
3
Upload image simply by scanning QR code
or input URL.
Select the image and adjust the cup size, image
brightness and contrast.
Create high resolution image or text in seconds onto
your favorite frothy beverages,both hot and cold.
Maintenance
Put the new cartridge into solt
Take out the cartridge from slot
Cartridge slot
Put the new cartridge into solt
Turn on
1
2
3
4
5
6
7
8
9
10
Take out PE foam
Plug in power
Connect wifi
Scan QR code,
upload image
Choose image
Place the cup full of drinks
on the tray
Click Printing
Finshed
( after " Please wait......")
Instructions
Take out the ink cartridge,
enter the SN code and
tear off the blue ribbon.
ink cartridge
1.Replace ink cartridge
Each ink cartridge can print about 800 cups. You can replenish it
from WiibooxSweetin Amazon Store.
2.Daily maintenance of cartridge
Please wipe the nozzle of the cartridge with a clean and moistened
paper towel before daily use to prevent blockage.
WiibooxSweetin Coffee Printer User Manual
