5 | Description of the access point
Wieland Electric GmbH | BA001098 | 09/2016 (Rev. A)
13
5.7
Network conn/–
Connect the DC network power supply to the access point with the corresponding polarity.
Take note of the permitted voltage and current values for the device (see Tab. 8 Operating
voltage connection).
Ensure the correct polarity of the network connection.
CAUTION
Abb. 5
Connection to power supply
Use a screwdriver to fasten the connection cables in the corresponding screw terminal.
Before switching on the power supply, ensure that the connection cables are correctly
fastened in the screw terminals.
CAUTION
5.8
*ANT antenna connection (only for AP ETH-A-A model version)
The antenna is connected to the access point via an SMA connector on the front panel.
The access point is not ready for operation without the antenna being connected to the
antenna socket labeled "ANT".
NOTE
Example of an antenna:
Abb. 6
Example of an antenna
