Operation manual
IM 240-i
Seite 17
Filler wire diameter selection
0,6mm
0,8mm
1,0mm
5.3
Set up, adjustment and display description
Synergic mode
5.3.1.1
Welding power set up
IM 240-i machines can be controlled with full synergic
feature. The welding power is to adjust just with one main
rotary encoder. By setup of material thickness (in
millimeters) are automatically set all welding parameters .
5.3.1.2
Arc length correction
There is possible to adjust length of the welding arc. By
turning the encoder in any direction is display switching
from Voltage mode to Arc length correction mode (% LED
Active).
Arc length = 0 –
Arc length = +30 –
Arc length = –30 –
0.8mm
0. mm
6
1 0
. mm
AMP
%
VOLT
