IM 240-i
Operation manual
Seite 16
5 Operation
5.1
Turning the device ON
Always use the main switch to turn On and Off the device, never use the power plug for this
purpose!
Power-on sequence
After powered special power on sequence is started on the operating panel, to give the user
information about the firmware.
a) Firmware type
(in voltage window)
Fm – Front panel IM
b) Amperage rating
(in Ampere window)
200
– 200Amp
c)
Firmware revision
(in Ampere window)
„
r1.1“ =
major . minor revision numbers.
5.2
Operating Panel
Filler wire material selection
FeSg2
(MIX) - Standard, not alloyed steel,
shielding gas: 82%Ar + 18%CO
2
FeSg2
(CO
2
) - Standard, not alloyed steel,
shielding gas: 100% CO
2
AlMg
- Alu Magnesium
shielding gas: 100%Ar
AlSi5
- Alu 5% Silicium,
shielding gas: 100%Ar
AlSi12
- Alu 12% Silicium,
shielding gas: 100%Ar
CuSi3
- 3% Silizium
shielding gas: 100%Ar
Manual
- Manual setup of wire speed and welding voltage
