Configuration in Typ. Situations
Wieland Electric GmbH | BA001039 (Rev. A) | 08/2016
94
Mobile WAN
configuration The mobile connection can be configured the same way as in the previous
situations (router connects itself after inserting the SIM card into SIM1 slot and attaching the antenna to
the ANT connector), configuration is accessible in the
Configuration
section, the
Mobile WAN
item (see
chapter 4.3.1), where mobile connection has to be enabled.
OpenVPN
configuration is accessible in the
Configuration
section in the
OpenVPN
item. Choose one of
two possible tunnels and enable it checking the Create 1st
OpenVPN
tunnel. It’s necessary to fill in the
protocol and port (according to the data about opposite side of the tunnel or Open VPN server). Fill in the
public IP address of the opposite side of the tunnel including the remote subnet and mask (not neces-
sary). Important items are
Local
and
Remote Interface IP Address
where the interfaces of the tunnel’s
ends has to be filled in. In this situation the
pre-shared secret
was know, so choose this option in the
Au-
thentication Mode
item and insert the secret (key) into the field. Confirm the configuration clicking the
Apply
button. For detailed configuration see chapter 4.10.
Secure networks interconnection –
OpenVPN
configuration
In the
Status
section,
Network
item, you can verify the activated network interface tun0 for the tunnel
with the IP addresses of the tunnel’s ends set. Successful connection can be verified in the
System Log
where
Initialization Sequence Completed
should be written out. Networks are now intercon-
nected – it can be verified by the ping program also (ping between tunnel’s endpoints IP addresses from
one of the routers, console is accessible via SSH).