5 Managing Switch
98
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
Item
Description
IP Address
Enter the IP address or host name of the station to ping. The initial value is blank.
The IP Address or host name you enter is not retained across a power cycle. Host
names are composed of series of labels concatenated with periods. Each label
must be between 1 and 63 characters long, maximum of 64 characters.
Count
Enter the number of echo requests to send. The default value is 4.
The value ranges from 1 to 5. The count entered is not retained across a power
cycle.
Interval (in sec)
Enter the interval between ping packets in seconds. The default value is 1. The
value ranges from 1 to 5. The interval entered is not retained across a power cycle.
Size (in bytes)
Enter the size of ping packet. The default value is 56. The value ranges from 8 to
5120. The size entered is not retained across a power cycle.
Ping Results
Display the ping reply format.
Apply
Click Apply to display ping result for the IP address.
5.12.3
IPv6 Ping Test
The IPv6 Ping Test page allows you to configure the Ping Test for IPv6.
To access this page, click Diagnostics > IPv6 Ping Test.
Figure 5.84 Diagnostics > IPv6 Ping Test
The following table describes the items in the previous figure.
