5 Managing Switch
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
43
5.6.3
DHCP Auto Provision
The DHCP Auto Provision feature allows you to load configurations using a server with DHCP options.
Through the remote connection, the Switch obtains information from a configuration file available through
the TFTP server.
To access this page, click System > DHCP Auto Provision.
The following table describes the items in the previous figure.
Item
Description
Status
Select the radio button to enable or disable the DHCP Auto Provisioning Setting.
Apply
Click Apply to save the values and update the screen.
The ensuing table for DHCP Auto Provision Information settings are informational only: Status.
5.6.4
IPv6 Settings
To access this page, click System > IPv6 Settings.
The following table describes the items in the previous figure.
Item
Description
Auto Configuration
Select the radio button to enable or disable the IPv6.
IPv6 Address
Enter the IPv6 address for the system.
Gateway
Enter the gateway address for the system.
DHCPv6 Client
Enter the DHCPv6 address for the system.
Apply
Click Apply to save the values and update the screen.
The ensuing table for IPv6 Information settings are informational only: Auto Configuration, IPv6 In Use
Address, IPv6 In Use Router, IPv6 Static Address, IPv6 Static Router and DHCPv6 Client.
Figure 5.11 System > DHCP Auto Provision
Figure 5.12 System > IPv6 Settings
