5 Managing Switch
34
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
5.3
Log In
To access the login window, connect the device to the network, see "Connecting the Switch to Ethernet
Ports" in section 4.4. Once the Switch is installed and connected, power on the Switch see the following
procedures to log into your Switch.
When the Switch is first installed, the default network configuration is set to DHCP enabled. You will need
to make sure your network environment supports the Switch setup before connecting it to the network.
1.
Launch your web browser on a computer.
2.
In the browser's address bar type in the Switch's default IP address (10.0.50.1). The login
screen displays.
3.
Enter the default user name and password (admin/admin) to log into the management inter-
face. You can change the default password after you have successfully logged in.
4.
Click Login to enter the management interface.
Figure 5.1 Login Screen
